Beryllium sulfate

Beryllium sulfate
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.033.478
EC Number
  • 236-842-2
RTECS number
  • DS4800000
UNII
  • InChI=1S/Be.H2O4S/c;1-5(2,3)4/h;(H2,1,2,3,4)/q+2;/p-2 Y
    Key: KQHXBDOEECKORE-UHFFFAOYSA-L Y
  • InChI=1/Be.H2O4S/c;1-5(2,3)4/h;(H2,1,2,3,4)/q+2;/p-2
    Key: KQHXBDOEECKORE-NUQVWONBAA
  • anhydrous: [Be+2].[O-]S([O-])(=O)=O
  • tetrahydrate: [OH2+][Be-2]([OH2+])([OH2+])[OH2+].[O-]S([O-])(=O)=O
Properties
BeSO4
Molar mass 105.075 g/mol (anhydrous)
177.136 g/mol (tetrahydrate)
Appearance white solid
Odor odorless
Density 2.44 g/cm3 (anhydrous)
1.71 g/cm3 (tetrahydrate)
Melting point 110 °C (230 °F; 383 K) (tetrahydrate, −2H2O)
400 °C (dihydrate, dehydr.)
550–600 decomposes
Boiling point 2,500 °C (4,530 °F; 2,770 K) (anhydrate)
580 °C (tetrahydrate)
36.2 g/100 mL (0 °C)
40.0 g/100 mL (20 °C)
54.3 g/100 mL (60 °C)
Solubility insoluble in alcohol
1.4374 (tetrahydrate)
Thermochemistry
90 J/mol K
−1197 kJ/mol
−1088 kJ/mol
Hazards
GHS labelling:
Danger
H301, H315, H317, H319, H330, H335, H350, H372, H411
Flash point Non-flammable
Lethal dose or concentration (LD, LC):
82 mg/kg (rat, oral)
80 mg/kg (mouse, oral)
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 0.002 mg/m3
C 0.005 mg/m3 (30 minutes), with a maximum peak of 0.025 mg/m3 (as Be)
REL (Recommended)
Ca C 0.0005 mg/m3 (as Be)
IDLH (Immediate danger)
Ca [4 mg/m3 (as Be)]
Safety data sheet (SDS) ICSC 1351
Related compounds
Other cations
Magnesium sulfate
Calcium sulfate
Strontium sulfate
Barium sulfate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

Beryllium sulfate normally encountered as the tetrahydrate, [Be(H2O)4]SO4 is a white crystalline solid. It was first isolated in 1815 by Jons Jakob Berzelius. Beryllium sulfate may be prepared by treating an aqueous solution of many beryllium salts with sulfuric acid, followed by evaporation of the solution and crystallization. The hydrated product may be converted to anhydrous salt by heating at 400 °C.