Pan Am Flight 845

Pan Am Flight 845
The plane after the accident
Accident
DateJuly 30, 1971 (1971-07-30)
SummaryStruck structures past runway on takeoff due to pilot error
SiteSan Francisco Int'l Airport
San Mateo County, California
United States
Aircraft

N747PA at John F. Kennedy International Airport in 1976, five years after the accident
Aircraft typeBoeing 747-121
Aircraft nameClipper America
Later:
Clipper Sea Lark
Clipper Juan T. Trippe
OperatorPan Am
IATA flight No.PA845
ICAO flight No.PAA845
Call signCLIPPER 845
RegistrationN747PA
Flight originLos Angeles International Airport, Los Angeles, California, United States
StopoverSan Francisco International Airport, San Francisco, California, United States
DestinationHaneda International Airport, Tokyo, Japan
Occupants218
Passengers199
Crew19
Fatalities0
Injuries29
Survivors218

Pan Am Flight 845 was a scheduled international passenger flight between Los Angeles and Tokyo, with an intermediate stop at San Francisco. The flight was operated by a Boeing 747 registered N747PA and named Clipper America.

On July 30, 1971, at 15:29 PDT, while it was taking off from San Francisco International Airport bound for Tokyo, the aircraft struck approach lighting system structures located past the end of the runway; this initial mishap seriously injured two passengers and caused significant physical damage to both the runway structures and the aircraft.

The crew continued the takeoff, flew out over the ocean, circled while dumping fuel, and returned to SFO. After coming to a stop, the crew ordered an emergency evacuation, during which 27 passengers were injured exiting the aircraft, eight of whom suffered serious back injuries. The accident was investigated by the NTSB, which determined the probable cause was the pilot's use of incorrect takeoff reference speeds. The NTSB also found various procedural failures in the dissemination and retrieval of flight safety information, which had contributed to the accident.